HobbyKing
TBS MINI PROGRAMMABLE SOUNDUNIT
| Can be fully configured with free PC software | Download from the files Tab below |
| Dimensions | 55x25x10mm |
| Note | Extension wire shown in the photo not included. |
Features:, Fully customer programmable., Technical Spec:, Supplyrange:, 3.5~12V (from receiver), Internal amplifier:, 1.2W at 8 Ohm and 5V supply, Switching outputs:, Minus switching, max. 12V/0.5A each, Weight:6g,
This soundunit is developed specially for electric powered airplanes. And ...5 Reviews
HobbyKing
NTM PROP DRIVE SERIES 35-36B 1400KV / 495W
| Model | NTM Prop Drive 35-36B 1400 |
| Max current | 53.94A |
| Shaft | 4mm |
| Weight | 117g |
| ESC | 60A |
| Cell count | 3s~4s Lipoly |
| Bolt holes | 18.9mm & 25mm |
Specs:, Model:, Kv:1400rpm/v, Turns:7, Max Power:, 495W @ 12v (3S) / Waiting test results (4S), Bolt thread:M3, Suggested Prop:, Prop test data coming soon!,
NTM Prop Drive motors are rock-solid performance outrunners with tight ...5 Reviews
HobbyKing
CNC PROP WASHER DA50 RED
| Material | AL6061 (anodized) |
| Thickness | 10.0mm |
| weight | 28g |
HobbyKing
3DSPINNER FOR HP-50 / DLE55 / DA50 / JC51 (41X41X26MM) GOLD
| Shaft size | 10mm |
| Bolt hole | 5mm |
5 Reviews
HobbyKing
3D SPINNER FOR DLE30 (33X33X26MM) BLUE
| Shaft size | 10mm |
| Bolt hole | 4.3mm |
HobbyKing
YAK 54 1.5M MONSTER 3D KIT ONLY V2 EPO
| Wingspan | 1500mm (59in) |
| Length | 1210mm (47.6in) |
| Wing area | 43.9dm2 |
| Wing load | 50.1g/dm2 |
| Flying weight | 2400g |
| ESC | 60A (Not Included) |
| Propeller | 14x7 |
| Required | TX & RX |
Motor:, 3740 Brushless outrunner 700kv (Not Included), Battery:, 3300mah 14.8V 4S lipo (Not Included), Servos:, 17g x 5 (Not Included), Channels:, 4 or 6 with ail/elev on 2channel each,
The YAK54 required a large 37 series outrunner and 60A ...5 Reviews
HobbyKing
CNC 3D SPINNER LARGE GOLD
| Material | aluminium 6061-T6 (anodized) |
| Weight | 80g |
| Diameter | 65mm |
| Length | 36mm |
| Mounting | 6 Hole |
| Hole circle | 34mm |
Features:, 1. It can be installed easily.,
CNC 3D spinner Large Gold Suitable for the following Engines ...HobbyKing
CNC 3D SPINNER SMALL V2 SILVER
| Material | aluminium 6061-T6 (anodized) |
| Weight | 37g |
| Diameter | 45mm |
| Length | 26mm |
| Mounting | 4 Hole |
| hole circle | 30mm |
Features:, 1. It can be installed easily.,
CNC 3D spinner Small V2 Silver For DA50, DL50, EVO ...HobbyKing
3D SPINNER FOR DLE111 / DA100 / TMM-53 /TMM-106 / 3W 50-100 (GREEN)
| Shaft size | 10mm |
| Dimensions | 55x33mm |
| Bolt hole | 5mm |
HobbyKing
CNC DRILLING JIG SET_4SS (DRILL:5.1MM) GOLD
| CNC Drilling Jig Set_4SS (Drill | 5.1mm) Gold |
| Mounting | 4 Hole |
| hole circle | 26mm |
| weight | 105g |
| Drill | 4.3mm Includ |
| Jig(Gold) | AL6061 (anodized) |
| Rotation prevention Pin(Blue) | AL6061 (anodized) |
| Drill Holders | 7075 (Hard coating) |
| Step 1 | insert jig into the hole to the propeller |
| Step 2 | After inserting jig, drill the first hole using the silver drill guide |
| Step 3 | Place rotation prevention pin (red) into the drilled hole |
| Step 4 | Drill the remainder of the holes using the drill guide. |
5 Reviews
HobbyKing
F-27 FRIENDSHIP FIBER GLASS KIT
| Wing Span | 1200mm |
| Length | 1000mm |
| Wing Area | 18dm2 |
| Model Weight | 1400g |
| Servo | 5 x 9g (Not included) |
| Motor | 2 x 26~28 series Brushless outrunner 1600Kv or higher (Not included) |
| ESC | 2 x 30A (Not included) |
| Battery | 11.1v 2200mah 3S1P (or greater) |
5 Reviews
HobbyKing
TZ-V2 .50 SIZE NITRO 3D HELICOPTER KIT (TORQUE TUBE)
| Length | 1250mm |
| Height | 429mm |
| Width | 231mm |
| Gear ratio | 8.27 |
| Pinion gear | 10T |
| Main gear | 85T |
| Main rotor diameter | 1345~1365mm |
| Tail rotor diameter | 242mm |
| Main rotor length | 600~620mm |
| Flying weight | Approx 3850g |
| Tail Rotor Drive System | Torque Tube |
| Radio Gear | Gyro/Rx |
| Rx Battery | (UBEC with 2 Cell Lipoly) |
Product Spec:, Type:, .50 size glow powered 3D Pro Helicopter, Control System:, 120° or 140° CCPM (140° Optional), Key Features:, Strong yet lightweight G-10 side frames,
The V2 .50 is a Nitro .50 size helicopter that ...5 Reviews
HobbyKing
NTM PROP DRIVE SERIES 35-42A 1250KV 600W
| Shaft | 4mm |
| Weight | 148g |
| ESC | 60A |
| Cell count | 3s~4s Lipoly |
| Bolt holes | 18.9mm & 25mm |
Specs:, Model:, NTM Prop Drive Series 35-42A 1250Kv, Kv:1250rpm/v, Turns:6, Max current:56, Max Power:, 500W @ 12v (3S) / 600W @ 15v (4S), Bolt thread:M3, Suggested Prop:, Prop test data coming soon!,
NTM Prop Drive motors are rock-solid performance outrunners with tight ...5 Reviews
HobbyKing
TZ-V2 .90 SIZE NITRO 3D HELICOPTER KIT (TORQUE TUBE)
| Length | 1360mm |
| Height | 455mm |
| Width | 185mm |
| Gear ratio | 8.27 |
| Pinion gear | 11T |
| Main gear | 91T |
| Main rotor diameter | 1523~1563mm |
| Tail rotor diameter | 265mm |
| Main rotor length | 680~710mm |
| Flying weight | Approx 4600g |
| Control System | 120° CCPM |
| Rotor Blade Length | 680-710mm |
| Tail Rotor Drive System | Torque Tube |
| Radio Gear | Gyro/Rx |
| Rx Battery | (UBEC with 2 Cell Lipoly) |
Product Spec:, Type:, .90 size glow powered 3D Pro Helicopter, Key Features:, Strong yet lightweight G-10 side frames,
The V2 .90 is a Nitro .90 size helicopter that ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR 4168 2650KV 1/8TH BRUSHLESS MOTOR
| Size | 41x68 |
| Max Amps | 129A |
| Max Volts | 17v |
| Max Watts | 2200w |
| Idle Current | 4.5A |
| Resistance (Ri) | 6.2 |
| Shaft size | 5mm |
Specs:, Kv:2650, Poles:6,
Forget those messy nitro engines and upgrade your 1/8th truck ...5 Reviews